Steelmate SBS-2 Blind Spot Detection Kit with Radar Sensor
$349.99 CAD
This is the Steelmate SBS-2 Blind Spot Detection kit, now using a single radar sensor that requires NO HOLES in your rear bumper.
One of the most unique features involves the single sensor design, and how it can be mounted. You may mount the sensor on a passenger vehicle (car) behind the rear bumper, or on a truck with steel bumpers, by mounting the single radar sensor like a back up camera (externally). This is the only kit on the market with this flexibility built-in.
Note. When installing the SBS-2 on a vehicle with a tow bar, the sensor must be placed at such a height that the tow bar is not located in the detection zone. The sensor must not be blocked by metal objects.
It comes equipped with 2 x LED Indicators, 1 x Radar Sensor, all wiring, and a controller ECU.
Features:
signaling
indoor (advantageous in heavy rain, in reduced visibility)
visual and audio (audio can be turned off)
detects:
vehicles approaching from the left or right side
not detected are:
parked vehicles in both directions
approaching vehicles from the opposite lane
vehicles that are being overtaken
for vehicles with 12V on-board voltage
current consumption: <250mA
length of cables from RJ to displays approx. 5.5 m and 6.5 m
optimized algorithms
it is necessary to carry out a test drive before using it in operation